How to adjust the level height of green light level meter

To adjust the leveling height of the Green Level, you need to follow the steps below.

CHECK THE EQUIPMENT: Before making any adjustments, you first need to check that the equipment is working properly. Make sure that the device has installed the battery and the body has not been seriously bumped or damaged. If there is any abnormality, it needs to be repaired or replaced in time.

Find a smooth platform: Use a tripod or adjustment pedal to make sure the platform is smooth and free from vibration or tilting. Place the laser green level on the platform and turn on the switch.

Adjust the height: Use the tripod's elevation handle to gradually adjust the height of the level until the laser plane is parallel to the ground or other reference plane you want to adjust.

Vertical Adjustment: Aim the laser green level at a vertical wall, turn on the power and place the bottom of the level on the ground. Observe the position of the laser, if it deviates from the wall, you need to rotate the instrument and adjust the laser direction until the laser line is perpendicular to the wall.

Leveling Adjustment: Place the laser green level flat on a smooth table, turn on the power and observe the position of the laser. If it deviates from the reference plane, you need to rotate the instrument and adjust the laser direction until the laser line is parallel to the reference plane.

Caution:

Adjustment of the height needs to be done slowly to avoid the loss of accuracy due to too high or too low height.
Attention needs to be paid to observation and gradual adjustment when adjusting the direction.
When using the laser green light level meter, you need to keep it clean and tidy to avoid interference with the instrument such as dust or moisture.
Keep away from strong light source or direct sunlight when using the laser green light level meter.
Through the above steps and precautions, you can effectively adjust the horizontal height of the green light level meter to ensure the accuracy of the measurement and work efficiency.